Used Soil Stabilizer Sale-manufacture,factory,supplier from China

Massive structureNew type of soil stabilizer is made up of frame, front and rear axles, power system, engine hood, the cabin, working device, pneumatic system, hydraulic system, electrical system, control system, fuel tank, assy accessory, painting and other parts and accessories.

Brand：xcmgDate of manufacturing: july 2022Model: xl2103 soil stabilizerEngine running hours：119h The soil stabilizer applies to web site blending operation of stabilized oil in substratum and bottom stratum in the course of dual carriageway, city street, square, wharf and car parking zone engineering and many others.it permits additionally mix-in-area of different share of lime-ash soil,lime-fly ash stabilized combination,stabilized gravel, and many others.Adopting weichai wp12 series digital injection engine, with low fuel intake and strong strength; the prepared show can study diverse d

The soil stabilizer applies to site mixing operation of stabilized oil in substratum and bottom stratum during highway, city road, square, wharf and parking lot engineering etc.It allows also mix-in-place of different proportion of lime-ash soil,lime-fly ash stabilized aggregate,stabilized gravel, etc.Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119h

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hMixing tool replacementRear feeding door is also called scraper plate, it is also steel doors to access to the mixing rotor, the lifting of this door can be controlled by a hydraulic cylinder, when replacing tool bit, after lifting the material door rising, the operator can very easily access to the mixing rotor and tool for inspection and replacement.

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119h

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hOperating consoleDashboard is installed with color LCD display, can display real time online the main working parameters, so that the operators observe the working condition of the machine easily.

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hThe machine adopts WP12 series electronic fuel injection engine, this engine has low emission and noise; the engine has some advanced functions like online display, diagnosis, and fault warning. At the same time can read different data visualized through equipped displayer. 

Mixing depth controlThe mixing depth means operating the depth control handle to stretch and draw back lifting oil cylinder, and control the rise and fall of the rotor. Depth indication devices are installed on the lifting oil cylinder, mixing depth can be read directly.

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hPropel systemWalking mechanism adopts front axle steering, rear axle drive, is composed of the front axle and rear axle, gearbox(and rear axle), rim, tires, etc. Rear axle driven by hydraulic motor, walking hydraulic motor is supplied with a standard variable plunger pump.

Personal safetyNever stay under or near the machine.Never move or pull the machine by hand.Be aware of possible dangers when loading and unloading the machine!Be careful when the machine is loaded and unloaded from transporter!

Adopting Weichai WP12 series electronic injection engine, with low fuel consumption and strong power; The equipped display can read various data and also has advanced functions such as engine fault diagnosis and fault alarm.The transmission system adopts an engine+transfer box structure, which is connected to the rotor pump, walking pump, and auxiliary pump for easy maintenance and repair.The working rotor adopts a new type of forged tool holder with positioning pins and high wear resistance tools, which are welded by a specialized machine and have a more accurate positioning of the tool bar;

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hloading/unloadingLoad the machine onto transport vehicle with crane. The machine weight is on thenameplate.Shalloperate according to the safety regulation, the hoist points refer to the picture below.Note:do not squeeze or press any part when lifting the machine, lest cause damage or deformation.

Long-distance transport noticesBesides following the relevant transport department regulations, shall also do the preparations: The wheel should be blocked with triangle wood, and anchor with rope to avoid moving during the transportation;  Turn off the power main supply; All exposed moving parts must be smeared with antirust agent to avoid rust; exposed piston rod should be covered with moisture proof paper.Engine electrical equipment, instrument penal should be covered with moisture proof cloth. 

Standards execution situationProduct performance requirements and test methods conforms toregulations of the product standard GB/T 25648 Road construction and maintenance machinerythe soil stabilizer.The establishment of product model conforms toQ/XGZL 102002 off –road Mobile machinery product productidentificationcode(PIN).The Test method of noise limit is in accordance with the regulations of GB/T 25614Earth-moving machinery - Determination of sound power level - Dynamic test conditions, GB/T 25615Earth-moving machinery—Determination of emission sound pressure l

Executive standards situation of product drawings and technical documentsThe drawing of product design accords with the provisions of Q/XGZL102007 Product drawings and design documents design basic requirements; the electrical drawings are in accordance with regulation of Q/XGZL 102010 Electric drawing specification and GB/T 47281Graphical symbol for electrical diagram, hydraulic drawings are in accordance with rules of Q/XGZL102011Hydraulic drawing specification.The establishment of technical documentsisin accordance with the requirements of Q/XGZL10200

Braking systemThe braking system is composed of service brake system (i.e., the foot brake) and parking brake system (i.e.

Standards execution situationProduct design and technical documents are basically correct, complete and unified and concise. And according to the requirements of Product design and design documents examination provisions, the signature is complete.

Standards execution situationThe safety signs used on the milling machine conform to the requirements of GB20178, Earth-moving machinery - Safety signs and hazard pictorials - General principles）Accords with national relevant safety and environmental protection laws and regulations.

Fuel fillerFill the diesel through filler port of the diesel tank. Transport securityThis machine has multiple hoisting devices that can be used during crane transportation, which is safe and reliable. 

Drive system adopts engine +transfer case, the transfer case connects the rotor pump, walking pump and auxiliary pump; Work rotor is driven by high speed motor and speed reducer, work rotor uses Kennametal tool bit and the tool holder, the rotor layout is independent designed, reasonable and ensuresevenly mixing, etc.Travel system: front axle steering, rear axle, drive axle has two gears, high speed used for traveling, low speed used for operation.

Cooling and vibration reductionThree level vibration insulation is used, including the drum shock absorber, seat shock absorber, and cabin shock absorber which are analyzed by CAE simulation. The cabin uses the 3D shock-absorbing technology and optimal arrangement of vibrating drum shock absorber to guarantee the excellent shock-absorbing effect.

Performance parametersForward velocity: 5、8、11、19、23、38km/hReverse speed: 5、11、23km/hTractive effort f=0.75: ≥79 kNMaximum gradeability: ≥25%Inflation pressure of tires : 260kPaWorking system pressure : 16MPaTransmission pressure : 1.3—1.8Mpa

Zoomlion used heavy Duty Crane， model QY25H552, high work efficiency and less prone to malfunctions, short working hours, timely machine maintenance, excellent vehicle condition.

Hydraulic drive systemThe closed-type hydraulic drive system composed of variable displacement pump and variable dual-motor realizes full-wheel drive, and guarantees excellent drive performance and gradeability. The 4-gear infinite variable speed guarantees most suitable working speed for different working conditions. Gear Ⅰ is used for compaction work with highest gradeability; gear Ⅱ and Ⅲ is for limiting slipping of front and rear drum under slipping conditions, gear Ⅳ is used for short distance transit with increased drive speed.