Used Motor Grader-manufacture,factory,supplier from China

Braking systemThe braking system consists of the braking system (i.e. the foot brake) and the parking brake system (i.e. hand brake). The service brake is a double - loop hydraulic braking system, which acts on the rear wheels of the motor grader, and the brake is safe and reliable. The parking brake system consists of the manipulator and brake. Front axleThe front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.

Hydraulic systemThe hydraulic system is composed by three main parts: Operating hydraulic system  Steering hydraulic system Service brake system Double - loop hydraulic system, which operates on the four rear wheels of the motor grader. They are made up of gear pump, brake valve, oil filling valve, accumulator, brake cylinder, etc. Used to control the service brake. 

Brand：XCMGDate of production: July 2022Model: XL2103 Soil StabilizerEngine operating hours：119hPropel systemWalking mechanism adopts front axle steering, rear axle drive, is composed of the front axle and rear axle, gearbox(and rear axle), rim, tires, etc. Rear axle driven by hydraulic motor, walking hydraulic motor is supplied with a standard variable plunger pump.

Performance parametersForward velocity: 5、8、11、19、23、38km/hReverse speed: 5、11、23km/hTractive effort f=0.75: ≥79 kNMaximum gradeability: ≥25%Inflation pressure of tires : 260kPaWorking system pressure : 16MPaTransmission pressure : 1.3—1.8Mpa

Conveying systemDrive modeIt’s applied with left and right independent drives and open-type hydraulic system, namely hydraulic pump - control valve - motor - chain drive - conveyance drive mechanism. The automatic control can be realized directly by ultrasonic level sensor. Control modeThe conveyance function is controlled by the conveyance switch on the control console or remote control box (Installed on two ends of screed). There are two control modes on the conveyance speed. One is the manual control realized by the manual conveyance switch installed on the control console.

·New exterior design.·Adopting an articulated frame, combined with front wheel steering, with a small turning radius and flexible maneuverability.·Electrohydraulic control power shift transmission, 6 gears forward and 3 gears reverse.·Adopting international matching hydraulic components, reliable operation.·The blade action is fully hydraulic controlled.·The rear axle is a three stage drive axle equipped with a NO-SPIN self-locking differential.·Adjustable control console, seats, reasonable arrangement of control handles and instruments, convenient use, and improved driving comfort.·The cab is

Technical parameter table of GR180Overall dimension (standard): 8900×2625×3420 mmTotal weight (standard): 15400 kgTire specification: 17.5-25Ground clearance (front axle):430mmTread: 2156mmSpace of front and rear axles: 6219 mmSpace of middle and rear wheels: 1538 mm

Brand：XCMGModel: QY25KMax rated lifting capacity: 25TFully-extended boom(m): 34.5mSize parameter: 13110 * 2550 * 3490Overall length (mm): 13110Overall width of the entire machine (mm): 2550Main winch Hydraulic control is used for speed regulation. The  system is driven by a hydraulic motor through a  planetary gear reducer, with a normally closed brake,  a balance valve and a grooved drum equipped.

Drive system adopts engine +transfer case, the transfer case connects the rotor pump, walking pump and auxiliary pump; Work rotor is driven by high speed motor and speed reducer, work rotor uses Kennametal tool bit and the tool holder, the rotor layout is independent designed, reasonable and ensuresevenly mixing, etc.Travel system: front axle steering, rear axle, drive axle has two gears, high speed used for traveling, low speed used for operation.

Brand：XCMGModel: QY25KMax rated lifting capacity: 25TFully-extended boom(m): 34.5mSize parameter: 13110 * 2550 * 3490Overall length (mm): 13110Overall width of the entire machine (mm): 2550Slewing  system Four-point contact-ball slewing ring is driven by the  planetary gear reducer of slewing mechanism, which  is driven by a hydraulic motor, and may continuously  slew 360°. Power control and free slewing function  as well as stepless speed regulation are available.  There is a horn switch fitted on the slewing control  lever.

Small Color DifferenceGood rigidity of blade bottom plate, strong bending resistance of tool holder, compacted and uniform paving surface.Low SeparationHydraulic lifting auger distribution system. Press one button for the best anti-segregation position;Ultra-narrow auger compartment, variable diameter and special-shaped blade design effectively reduce material separation.High ReliabilityHigh pressure distributing hydraulic system, resistant to high pressure; external generator, good cooling effect, low failure rate of the motor.   

Hydraulic drive systemThe closed-type hydraulic drive system composed of variable displacement pump and variable dual-motor realizes full-wheel drive, and guarantees excellent drive performance and gradeability. The 4-gear infinite variable speed guarantees most suitable working speed for different working conditions. Gear Ⅰ is used for compaction work with highest gradeability; gear Ⅱ and Ⅲ is for limiting slipping of front and rear drum under slipping conditions, gear Ⅳ is used for short distance transit with increased drive speed.

Brand: XCMG PaverModel: XCMG RP953TManufacture date: June 2020Parameters:Overall weight: 22000KGEngine: Shangchai SC9DF209.1G3Powerful Power Plant· 180kW engine satisfies demanding power requirements.High Flatness· The high-rigidity screed is equipped with an advanced four-motor vibrating system to ensure that the speed of the main section and the telescopic side section is consistent to achieve high leveling operation.Small Color Difference· Good rigidity of blade bottom plate, strong bending resistance of tool holder, compacted and uniform paving surface.Low Separation· Hydraulic lifting aug

QY25K is widely used in construction sites, urban reconstruction, transportation, ports, bridges, oil fields, mines and other complex operating environments.Operator's  cab Ergonomic cab design, with swing-out doors, safety glass, sun visor, adjustable seats and protective rails equipped. Air-conditioner is standard.

Fuel fillerFill the diesel through filler port of the diesel tank. Transport securityThis machine has multiple hoisting devices that can be used during crane transportation, which is safe and reliable. 

PRODUCT FEATUREXCT60L6 truck crane is widely used for the  lifting operations in Oilfields, mines, general engineering projects, such  as construction site, urban renewal,  communication and transportation, sea ports, bridge construction, desert, and complex working environments.

Cooling and vibration reductionThree level vibration insulation is used, including the drum shock absorber, seat shock absorber, and cabin shock absorber which are analyzed by CAE simulation. The cabin uses the 3D shock-absorbing technology and optimal arrangement of vibrating drum shock absorber to guarantee the excellent shock-absorbing effect.

Zoomlion used heavy Duty Crane， model QY25H552, high work efficiency and less prone to malfunctions, short working hours, timely machine maintenance, excellent vehicle condition.

QY25K is widely used in construction sites, urban reconstruction, transportation, ports, bridges, oil fields, mines and other complex operating environments.Brand：XCMGModel: QY25KMax rated lifting capacity: 25TFully-extended boom(m): 34.5mSize parameter: 13110 * 2550 * 3490Overall length (mm): 13110Overall width of the entire machine (mm): 2550

Standards execution situationThe safety signs used on the milling machine conform to the requirements of GB20178, Earth-moving machinery - Safety signs and hazard pictorials - General principles）Accords with national relevant safety and environmental protection laws and regulations.

QY25K is widely used in construction sites, urban reconstruction, transportation, ports, bridges, oil fields, mines and other complex operating environments.Brand：XCMGModel: QY25KMax rated lifting capacity: 25TFully-extended boom(m): 34.5mSize parameter: 13110 * 2550 * 3490Overall length (mm): 13110Overall width of the entire machine (mm): 2550Tires10 tires and 1 spare tire. Single tire installed on the  front axle, dual-tire installed on the middle and rear  axles. Tire specifications: 12R22.5.

XCMG used wheel loader, Reliable quality, stable performance, mature technology, perfect after-sales service, low failure rate, convenient maintenance and repair, and complete accessories. The planetary gearbox has a low failure rate, fast shifting speed, flexible action, and high work efficiency.Short working hours, timely machine maintenance, excellent vehicle condition.

Product AdvantagesImprove the joint operation capacity, featuring large lug seat super strong structural parts, can withstand the torque and impact load under various working conditions, widely used in mines, cement, steel plants, etc. The optional enlarged bucket can meet the higher efficiency requirements of sand and gravel, commercial mixing station, coal yard, coal chemical industry, etc. Product Features1. Adopt fixed variable hydraulic system, energy saving and high efficiency.

XCMG used wheel loader, Reliable quality, stable performance, mature technology, perfect after-sales service, low failure rate, convenient maintenance and repair, and complete accessories. The planetary gearbox has a low failure rate, fast shifting speed, flexible action, and high work efficiency.Short working hours, timely machine maintenance, excellent vehicle condition.